View N156BGE-P41_7692909.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification version 2.0 29 november 201 2 1 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. customer: approved by signature name / title note please return 1 copy for your confirmation with you r signature and comments. doc. number: tentative specification preliminary specification approval specification model no.: n156bge suffix: p41 approved by checked by prepared by
product specification version 2.0 29 november 201 2 2 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. contents 1. general description ............................. ........................................... e` ! x` 1.1 overview ....................................... ................................................... . e` e`e` e` ! x` x` x` x` 1.2 general specificati0ns ......................... ..................................... e` e`e` e` ! x` x` x` x` 2. mechanical specifications ....................... ..................................... e` ! x` 2.1 connector type ................................. ............................................ e` e`e` e` ! x` x` x` x` 3. absolute maximum ratings ........................ .................................... e` ! x` 3.1 absolute ratings of environment (based on cmi m odule) e` e`e` e` ! x` x` x` x` 3.2 absolute ratings of environment (open cell) .... ............................................. 6 3.3 electrical absolute ratings (open cell) ........ ................................................... . 7 3.3.1 tft lcd module ............................... ................................................... ..........................7 4. electrical specifications....................... ....................................... e` ! x` 4.1 tft lcd open cell .............................. ............................................ e` e`e` e` ! x` x` x` x` 4.2. interface connections ......................... ................................... e` e`e` e` ! x` x` x` x` 4.3 electrical characteristics..................... .............................. e` e`e` e` ! x` x` x` x` 4.3.1 tft lcd open cell ............................ ...................................... e` e`e` e` ! x` x` x` x` 4.3.2 led converter specification.................. ........................ e` e`e` e` ! x` x` x` x` 4.4 lvds input signal timing specifications ........ .................. e` e`e` e` ! x` x` x` x` 4.4.1 lvds dc specifications ....................... ................................ e` e`e` e` ! x` x` x` x` 4.4.2 lvds data format ............................. ..................................... e` e`e` e` ! x` x` x` x` 4.4.3 color data input assignment .................. ...................... e` e`e` e` ! x` x` x` x` 4.5 display timing specifications .................. .............................. e` e`e` e` ! x` x` x` x` 4.6 power on/off sequence .......................... ................................... e` e`e` e` ! x` x` x` x` 5. optical characteristics ......................... ....................................... e` ! x` 5.1 test conditions................................ .............................................. e` e`e` e` ! x` x` x` x` 5.2 optical specifications ......................... ...................................... e` e`e` e` ! x` x` x` x` 6. packing ......................................... ................................................... ...................................... 19 6.1 cmi open cell label............................ ................................................... ......................... 23 6.2 package reliability ............................ ................................................... ..................................... 24 6.3 carton ......................................... ................................................... ....................................... 24 6.4 pallet......................................... ................................................... ......................................... 25 7. precautions ..................................... ................................................... ................................ 26 7.1 handling precautions........................... ................................................... .................... 26 7.2 storage precautions ............................ ................................................... ..................... 26 7.3 operation precautions.......................... ................................................... .................... 26 appendix. outline drawing .......................... ..................................... e` e`e` e` ! x` x` x` x`
product specification version 2.0 29 november 201 2 3 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. revision history version date page description 2.0 mar, 23, 2012 all spec ver.1.0 was first issued .
product specification version 2.0 29 november 201 2 4 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 1. general description 1.1 overview N156BGE-P41 is a 15.6 tft liquid crystal display wi th led driver ics and a 40-pins-and-1ch-lvds circuit board. this product su pports 1366 x 768 hd mode and can display 262,144 colors. the backlight unit is not built in. 1.2 general specificati0ns item specification unit note screen size 15.6 diagonal driver element a-si tft active matrix - - pixel number 1366 x r.g.b. x 768 pixel - pixel pitch 0.252 (h) x 0.252 (v) mm - pixel arrangement rgb vertical stripe - - display colors 262,144 color - transmissive mode normally white - - surface treatment hard coating (3h), glare - - 2. mechanical specifications item min. typ. max. unit note horizontal (h) with pcb 353.532 353.632 353.732 mm horizontal (h) w/o pcb 353.532 353.632 353.732 mm vertical (v) with pcb 216.436 216.536 216.636 mm vertical (v) w/o pcb 202.736 202.836 202.936 mm thickness (t) with pcb - 1.565 - mm size thickness (t) w/o pcb - 1.27 - mm weight - 203.6 g i/f connector mounting position the mounting inclination of the connector makes the screen center within 0.5mm as the horizontal. (1) (2) note (1) please refer to the attached drawings for more information of front and back outline dimensio ns. (2) connector mounting position 2.1 connector type please refer appendix outline drawing for detail de sign. connector part no.:ipex-20455-040e-12 users connector part no: ipex-20453-040t-01 or equ ivalent pin1 pin40
product specification version 2.0 29 november 201 2 5 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 2.1.2 led light-bar connector msk24022p10a
product specification version 2.0 29 november 201 2 6 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 3. absolute maximum ratings 3.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) note (1) (a) 90 %rh max. (ta <= 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel surface should b e 0 oc min. and 60 oc max. 3.2 absolute ratings of environment (open cell) high temperature or humidity may reduce the perform ance of panel. please store lcd panel within the specified storage conditions. storage condition: with packing. storage temperature range: 255 oc. storage humidity range: 5010%rh. shelf life: 30days storage range relative humidity (%rh) operating temperature (oc) 100 80 60 -20 40 0 20 -40 80 40 60 20 10 90
product specification version 2.0 29 november 201 2 7 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 3.3 electrical absolute ratings (open cell) 3.3.1 tft lcd module value item symbol min. max. unit note power supply voltage vccs -0.3 +4.0 v logic input voltage v in -0.3 vccs+0.3 v (1) note (1) stresses beyond those listed in above ele ctrical absolute ratings may cause permanent damage to the device. normal operation sh ould be restricted to the conditions described in electrical characteristics.
product specification version 2.0 29 november 201 2 8 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 4. electrical specifications 4.1 function block diagram 4.2. interface connections pin assignment pin symbol description remark 1 nc no connection (reserve) 2 vccs power supply (3.3v typ.) 3 vccs power supply (3.3v typ.) 4 vedid ddc 3.3v power 5 nc no connection (reserved for cmi test) 6 clkedid ddc clock 7 dataedid ddc data 8 rxin0- lvds differential data input 9 rxin0+ lvds differential data input r0-r5, g0 10 vss ground 11 rxin1- lvds differential data input 12 rxin1+ lvds differential data input g1~g5, b0, b1 13 vss ground 14 rxin2- lvds differential data input 15 rxin2+ lvds differential data input b2-b5,hs,vs, de 16 vss ground 17 rxclk- lvds differential clock input 18 rxclk+ lvds differential clock input lvds clk 19 vss ground 20 nc no connection (reserve) v edid data edid vccs gnd converter input signals lvds display data & clock tft lcd panel scan driver ic dc/dc converter & reference voltage generator input connector edid eeprom clk edid timing ontroller data driver ic led converter
product specification version 2.0 29 november 201 2 9 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 21 nc no connection (reserve) 22 vss ground 23 nc no connection (reserve) 24 nc no connection (reserve) 25 vss ground 26 nc no connection (reserve) 27 nc no connection (reserve) 28 vss ground 29 nc no connection (reserve) 30 nc no connection (reserve) 31 led_gnd led ground 32 led_gnd led ground 33 led_gnd led ground 34 nc no connection (reserve) 35 led_pwm pwm control signal of led converter 36 led_en enable control signal of led converter 37 nc no connection (reserve) 38 led_vccs led power supply 39 led_vccs led power supply 40 led_vccs led power supply note (1) the first pixel is odd as shown in the fol lowing figure.
product specification version 2.0 29 november 201 2 10 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 1,1 (odd) 1,2 (even) 1,3 (odd) 1,4 (even) 2,1 2,2 3,1 ymax,1 ymax, xmax 1,xmax pitch pitch 4.2.2 led converter output pin assignment pin symbol description remark 1 nc no connection (reserve) 2 nc no connection (reserve) 3 led1- led light bar feedback channel 4 led2- led light bar feedback channel 5 led3- led light bar feedback channel 6 led4- led light bar feedback channel 7 led5- led light bar feedback channel 8 nc no connection (reserve) 9 led+ led light bar input power supply 10 led+ led light bar input power supply
product specification version 2.0 29 november 201 2 11 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 4.3 electrical characteristics 4.3.1 lcd eletronics specification value parameter symbol min. typ. max. unit note power supply voltage vccs 3.0 3.3 3.6 v (1) ripple voltage v rp - 50 - mv (1) inrush current i rush - - 1.5 a (1),(2) mosaic - 270 320 ma (3)a power supply current black lcc - 340 380 ma (3)b note (1) the ambient temperature is ta = 25 2 oc. note (2) i rush : the maximum current when vccs is rising i is : the maximum current of the first 100ms after powe r-on measurement conditions: shown as the following fig ure. test pattern: black. r1 (high to low) (control signal) +12v sw q2 c1 1uf vccs +3.3v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) vccs rising time is 0.5ms
product specification version 2.0 29 november 201 2 12 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. note (3) the specified power supply current is unde r the conditions at vccs = 3.3 v, ta = 25 2 oc, d c current and f v = 60 hz, whereas a power dissipation check pattern below is displayed. active area b. black pattern active area a. mosaic pattern
product specification version 2.0 29 november 201 2 13 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 4.3.2 led converter specification value parameter symbol min. typ. max. unit note converter input power supply voltage led_vccs 6.0 12.0 21.0 v converter inrush current iled rush - - 1.5 a (1) backlight on 3.0 - 3.6 v en control level backlight off 0 - 0.5 v pwm high level 3.0 - 3.6 v pwm control level pwm low level 0 - 0.5 v 10 - 100 % pwm control duty ratio 5 - 100 % (2) pwm control permissive ripple voltage v pwm_pp - - 100 mv pwm control frequency f pwm 190 - 2k hz (3) led power current led_vccs =typ. iled 171 197 214 ma (4) note (1) iled rush : the maximum current when led_vccs is rising, iled is : the maximum current of the first 100ms after powe r-on, measurement conditions: shown as the following fig ure. led_vccs = typ, ta = 25 2 oc, f pwm = 200 hz, duty=100%. r1 (high to low) (control signal) led_vccs(typ) sw=24v q2 c1 1uf led_vccs(typ) irl3303 q1 irl3303 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (led converter input)
product specification version 2.0 29 november 201 2 14 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 90% 10% 0.5ms 0v iled rush iled is iled led_vcc 100ms led_pwm led_en 0v 0v note (2) if the pwm control duty ratio is less than 10%, there is some possibility that acoustic noise or backlight flash can be found. and it is also diffic ult to control the brightness linearity. note (3) if pwm control frequency is applied in the range less than 1khz, the waterfall phenomenon o n the screen may be found. to avoid the issue, its a suggestion that pwm control frequency should follow the criterion as below. pwm control frequency f pwm should be in the range * + f n )33.0 ( f pwm f n * + )66.0 ( n : integer )3 ( 3 n f : frame rate note (4) the specified led power supply current is under the conditions at led_vccs = typ., ta = 25 2 oc, f pwm = 200 hz, duty=100%. vled rising time is 0.5ms
product specification version 2.0 29 november 201 2 15 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. t/7 in6 in5 in4 in3 in2 in1 in0 in13 in12 in11 in10 in9 in8 in7 in20 in19 in18 in17 in16 in15 in14 g0 r3 r2 r1 r0 r5 r4 b1 g4 g3 g2 g1 b0 g5 de b5 b4 b3 b2 vsync hsync signal for 1 dclk cycle (t) rxin0 rxin1 rxin2 clk+ 4.4 lvds input signal timing specifications 4.4.1 lvds dc specifications value parameter symbol min. typ. max. unit note lvds differential input high threshold v th(lvds) - - +100 mv (1), v cm =1.2v lvds differential input low threshold v tl(lvds) -100 - - mv (1) v cm =1.2v lvds common mode voltage v cm 1.125 - 1.375 v (1) lvds differential input voltage |v id | 100 - 600 mv (1) lvds terminating resistor r t 100 ohm - note (1) the parameters of lvds signals are defined as the following figures. 4.4.2 lvds data format 0v v cm |v id | single ended 0v |v id | v th ( lvds ) v tl ( lvds ) differential
product specification version 2.0 29 november 201 2 16 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 4.4.3 color data input assignment the brightness of each primary color (red, green a nd blue) is based on the 6-bit gray scale data inpu t for the color. the higher the binary input the brig hter the color. the table below provides the assign ment of color versus data input. data signal red green blue color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0)/dark red(1) red(2) : : red(61) red(62) red(63) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0)/dark green(1) green(2) : : green(61) green(62) green(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0)/dark blue(1) blue(2) : : blue(61) blue(62) blue(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltag e
product specification version 2.0 29 november 201 2 17 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 4.5 display timing specifications the input signal timing specifications are shown as the following table and timing diagram . signal item symbol min. typ. max. unit note dclk frequency 1/tc 67.86 75.4 79.17 mhz - vertical total time tv 773 806 815 th - vertical active display period tvd 768 768 768 th - vertical active blanking period tvb tv-tvd 38 tv-tvd th - horizontal total time th 1452 1560 1608 tc - horizontal active display period thd 1366 1366 1366 tc - de horizontal active blanking period thb th-thd 194 th-thd tc - note (1) because this module is operated by de only mode, hsync and vsync are ignored. input signal timing diagram t h t c dclk t hd t vd t v de de data
product specification version 2.0 29 november 201 2 18 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 4.6 power on/off sequence the power sequence specifications are shown as the following table and diagram . value symbol min. typ. max. unit note t1 0.5 - 10 ms t2 0 - 50 ms t3 0 - 50 ms t4 500 - - ms t5 200 - - ms t6 200 - - ms t7 0.5 - 10 ms t a 0.5 - 10 ms t b 0 10 ms t c 10 - - ms t d 10 - - ms t e 10 - - ms t f 10 - - ms note (1) please dont plug or unplug the interface cable when system is turned on. note (2) please avoid floating state of the interfa ce signal during signal invalid period. note (3) it is recommended that the backlight power must be turned on after the power supply for lcd a nd the interface signal is valid. - power supply for lcd, vccs - interface signal (lvds signal of transmitter), v i power on power off 0v 0v 10% t6 t5 t4 t3 t2 t1 90% 10% 90% valid data 10% t7 t a t c t b t d t e t f 10% 10% 90% 90% - power supply for led converter, led_vccs - led converter dimming signal, led_pwm - led converter enable signal, led_en 0v 0v 0v pwm signal
product specification version 2.0 29 november 201 2 19 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 5. optical characteristics 5.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 3.3 v led light bar input current i l 63 ma the measurement methods of optical characteristics are shown in section 5.2. the following items should be measured under the test conditions descri bed in section 5.1 and stable environment shown in note (5). 5.2 optical specifications item symbol condition min. typ. max. unit note center transmittance t% 7.47 7.86 (1) , (5) , (8) contrast ratio cr q x =0 , q y =0 cs-1000t, cmo blu 500 650 (1) ,(3) , (5) transmittance uniformity t% q x =0 , q y =0 bm-5a 1.25 (1) , (5) , (7) t r - 3 8 ms response time t f q x =0 , q y =0 - 7 13 ms (4) rcx 0.597 - red rcy 0.342 - gcx 0.301 - green gcy 0.557 - bcx 0.140 - blue bcy 0.173 - wcx 0.313 - color chromaticity white wcy q x =0 , q y =0 cs-1000t standard light source c typ.- 0.03 0.357 typ.+ 0.03 - (0), (5) q x + 40 45 - horizontal q x - 40 45 - q y + 15 20 - viewing angle vertical q y - cr 3 10 bm-5a 40 45 - deg. (1),(3),(5) note (0) light source is the standard light source c which is defined by cie and driving voltages ar e based on suitable gamma voltages. the calculating m ethod is as following 1. measure modules and blus spectrums. white is w ithout signal input and r, g, b are with signal input. blu is supplied by cmi. 2. calculate cells spectrum. 3. calculate cells chromaticity by using the spect rum of standard light source c
product specification version 2.0 29 november 201 2 20 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. note (1) light source is the blu which is supplied by cmo and driving voltages are based on suitable gamma voltages. white is without signal input and r , g, b are with signal input. spec is judged by cmos golden sample. note (2) definition of viewing angle ( q x, q y): note (3) definition of contrast ratio (cr): the contrast ratio can be calculated by the followi ng expression. contrast ratio (cr) = l63 / l0 l63: luminance of gray level 63 l 0: luminance of gray level 0 cr = cr (1) cr (x) is corresponding to the contrast ratio of th e point x at figure in note (6). note (4) definition of response time (t r , t f ): 100% 90% 10% 0% gray l evel 63 gray l evel 0 gray l evel 63 t ime t f optical response t r 66.67 ms 66.67 ms 12 oclock direction q y+ = 90o 6 oclock q y- = 90o q x - q x + q y- q y + x- y+ y- x+ normal q x = q y = 0o q x+ = 90o q x- = 90o
product specification version 2.0 29 november 201 2 21 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. note (5) measurement setup: the lcd module should be stabilized at given temp erature for 20 minutes to avoid abrupt temperature change during measuring. in order to st abilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. note (6) definition of transmittance variation ( d t%): measure the transmittance at 5 points note (7) definition of transmittance (t%): module is without signal input. blu is supplied by cmo. cs-1000t field of view = 2o 500 mm lcd module lcd p anel center of the s creen light shield room (ambient luminance < 2 lux) usb2000 maximum [t%(1), t%(2), t%(5)] minimum [t%(1), t%(2), t%(5)] t% = luminance of lcd module luminance of backlight transmittance = 100%
product specification version 2.0 29 november 201 2 22 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. note (8) the listed optical specifications refer to the initial value of manufacture, but the conditio n of the specifications after long-term operation will n ot be warranted. d w active area vertical line horizontal line : test point x=1 to 5 5 1 2 3 4 d/4 d/2 3d/4 w/4 w/2 3w/4 x
product specification version 2.0 29 november 201 2 23 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 6. packing 6.1 cmi open cell label the barcode nameplate is pasted on each open cell a s illustration for cmi internal control. (a) model name: n156bge - p41 (b) revision: rev. xx, for example: c1, c2 etc. (c) serial id: x x x x x x x y m d l n n n n serial id includes the information as below: (a) manufactured date: year: 0~9, for 2010~2019 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i , o and u (b) revision code: cover all the change (c) serial no.: manufacturing sequence of product (d) product line: 1 -> line1, 2 -> line 2, etc. product line year, month, date cmi internal use revision cmi internal use serial no. 5y xxx 06 ymdlnnnn N156BGE-P41 rev. xx xxxxxxxymdlnnnn rev. xx made in xxxx
product specification version 2.0 29 november 201 2 24 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 6.2 package reliability (1) carton packing should have no failure in the fo llowing reliability test items test item test conditions note packing vibration ista standard random, frequency range: 1 C 200 hz top & bottom: 30 minutes (+z), 10 min (-z), right & left: 10 minutes (x) back & forth 10 minutes (y) non operation 6.3 carton figure. 6-3 packing method method
product specification version 2.0 29 november 201 2 25 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 6.4 pallet figure. 6-4 packing method method
product specification version 2.0 29 november 201 2 26 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. 7. precautions 7.1 handling precautions (1) the module should be assembled into the system firmly by using every mounting hole. be careful not to twist or bend the module. (2) while assembling or installing modules, it can only be in the clean area. the dust and oil may cau se electrical short or damage the polarizer. (3) use fingerstalls or soft gloves in order to kee p display clean during the incoming inspection and assembly process. (4) do not press or scratch the surface harder than a hb pencil lead on the panel because the polarize r is very soft and easily scratched. (5) if the surface of the polarizer is dirty, pleas e clean it by some absorbent cotton or soft cloth. do not use ketone type materials (ex. acetone), ethyl alco hol, toluene, ethyl acid or methyl chloride. it might permanently damage the polarizer due to chemi cal reaction. (6) wipe off water droplets or oil immediately. sta ining and discoloration may occur if they left on p anel for a long time. (7) if the liquid crystal material leaks from the p anel, it should be kept away from the eyes or mouth . in case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap. (8) protect the module from static electricity, it may cause damage to the c-mos gate array ic. (9) do not disassemble the module. (10) do not pull or fold the led wire. (11) pins of i/f connector should not be touched di rectly with bare hands. 7.2 storage precautions (1) high temperature or humidity may reduce the per formance of module. please store lcd module within the specified storage conditions. (2) it is dangerous that moisture come into or cont acted the lcd module, because the moisture may damage lcd module when it is operating. (3) it may reduce the display quality if the ambien t temperature is lower than 10 oc. for example, the response time will become slowly, and the starting voltage of led will be higher than the room temperature. 7.3 operation precautions (1) do not pull the i/f connector in or out while t he module is operating. (2) always follow the correct power on/off sequence when lcd module is connecting and operating. this can prevent the cmos lsi chips from damage dur ing latch-up. (3) the startup voltage of backlight is approximate ly 1000 volts. it may cause electrical shock while assembling with converter. do not disassemble the m odule or insert anything into the backlight unit.
product specification version 2.0 29 november 201 2 27 / 27 the copyright belongs to chimei innolux. any unauth orized use is prohibited. appendix. outline drawing

▲Up To Search▲

Price & Availability of N156BGE-P41

	To Download N156BGE-P41 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .